|
|
![]() |
| ||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||
|
Traxis DBS2500 FREE-TO-AIR SATELLITE
RECEIVER Full MPEG2 DVB Compliant - DiSEqC 1.2 for motor control - DiSEqC 1.0 for switching control - 22 KHz switching - Auto converting of PAL to NTSC, and NTSC to PAL - User programmable satellite and transponder information - Network Auto Search - Stores up to 100 satellites - Stores up to 4,000 channels - RS-232 software upgrade port - SCPC / MCPC receivable - Multi-Language Menu Option - Auto switching power supply allows this receiver to work anywhere in the world. |
|
![]() |
Standard
Ku LNBF ASC321 Ku LNBs can be used with any MPEG2/DVB compliant receivers. Suitable for analog and digital reception. Voltage-controlled (13 / 18 VDC) polarity. Best solution for individual and multi-satellite system. Compatible with HotDISH 75 above, Winegard (model 2076) and all other dish antennas with "universal mounting bracket". |
|
|
Dual Output Ku
LNBF One-Dish / Two-Receiver Solution. DVB322 Ku LNBs can be used with any MPEG2/DVB compliant receivers. Suitable for analog and digital reception. Voltage-controlled (13 / 18 VDC) polarity. Best solution for individual and multi-satellite systems utilizing two individual "stand-along" satellite receivers. Compatible with HotDISH 75 above, Winegard (model 2076) and all other dish antennas with "universal mounting bracket". |
|
![]() |
Traxis DBS2500 FREE-TO-AIR SATELLITE
SYSTEM Get more than 250 ABSOLUTELY FREE clean, clear channels with MPEG-2 QUALITY! No Activation! No Subscription! Everything from News and Sports to Movies and International Channels is at your fingertips with MPEG-2. Want news from the homeland? Get the best from Egypt, Saudi Arabia, China, Canada, Japan, Turkey, Mexico, Korea, Vietnam, Italy, Germany and many more! COMPLETE SYSTEM: Receiver, Dish, LNB and Installation Kit. |
|
![]() |
2 LNB Bracket for
HotDISH 75 Enjoy programming from 2 satellites without moving your dish! Satellite range is between 4 and 12 orbital degrees. For the more serious satellite surfer, we recommend the V-BOX II Positioner in conjunction with the SG2100 Horizon-To-Horizon Motor listed below. |
|
|
DiSEqC 2 X 1 Switch The DiSEqC switch will enable the user to select one LNB signal between 2 different LNBs of any type. The 2 input ports marked SAT1 and SAT2 are connected to the 2 LNBs, which may be on 2 different dishes, and the output marked OUT is connected to the receiver. The selection of the LNBs is done by choosing the appropriate Tone Burst A or B in the menu of the receiver. |
|
|
DiSEqC 4 X 1 Switch The DiSEqC switch will enable the user to select one LNB signal between 4 different LNBs of any type. The 4 input ports marked SAT1, SAT2, SAT3 or SAT4 are connected to the 4 LNBs, which may be on 4 different dishes, and the output marked OUT is connected to the receiver. The selection of the LNBs is done by choosing the appropriate Tone Burst A, B, C, or D in the menu of the receiver. |
|
|
digibox
DiSEqC POSITIONER Compatible with any DiSEqC 1.2 Motor - 3 Digit LED Display - 60 Satellite Positions - Fine-tune EAST / WEST Buttons - Goto X Function (Drive the motor to any angle you want) - Remote Control Included - Overload Protection ( Auto-Recovery ) - Anti-Noise Design - Recommended for SG2100 Horizon-To-Horizon Motor below. |
|
|
SG2100 DiSEqC 1.2 HORIZON-TO-HORIZON MOTOR Fits all popular dish with 42mm tube, including Winegard - Special Design for any Receiver with DiSEqC 1.2 - Only One Coaxial Cable Control - Go To X Function - High Efficiency - Compact Structure - Ultra Low Noise - Adjustable Hardware Limits - Easy Installation with LED Indicator - Manual EAST / WEST button - For Dish up to 1.2M. Recommended for use with our digibox DiSEqC POSITIONER above. |
|
|
"The Satellite Installer" - © 2005 - All Rights Reserved